The JHM and JHMI range of joist hangers can be used to connect solid sawn joists, trusses and engineered joists to masonry walls or steel beams. | Material: Pre-galvanised mild steel
The MHA is a galvanised mini joist hanger suitable for use with regularised timber, rough sawn timber, I-Joists and LVL.
Ideally suited for small timber sections and timber members; such as trimmers and ceiling joists
| Weight | 0.5 kg |
|---|---|
| Dimensions | 45 × 38 × 66 mm |
| Choose your width | 38mm, 47mm, 50mm |
| Application | The MHA is a galvanised mini joist hanger suitable for use with regularised timber, rough sawn timber, I-Joists and LVL. Ideally suited for small timber sections and timber members; such as trimmers and ceiling joists |
| Installation notes | For solid header fill all nail holes. For I-Joist headers fill the bottom two nail holes on each side. Hanger depth should be at least 60% of carried member depth to prevent rotation. If less than 60%, then additional lateral restraint to the top of the carried member is required. Solid Headers Install 5 header nails per side [A] and install 3 joist nails per side [B]. Fasteners as stated in the relevant performance tables. I-Joist Headers For I-joist headers, 2 hangers are required; one top and one bottom fill the bottom 2 nail holes on each side; 2 header nails per side and 2 joist nails per side. |
| Material | 275 g/m2 Pre-galvanised Mild Steel. |
