Description
Backer Free, Top Flange I-Joist Hanger
The HITB hanger eliminates the requirement for backer blocks when supported from an I-Joist header. The bottom flange location tabs and an open top flange provide enhanced capacity and improved ease of installation. Eliminates the need for backer blocks with an I-joist to I-joist connection. Bottom flange location tabs quickly set the hanger onto the I-joist header. Open top flange improves ease of installation. Optional nail holes for additional download and uplift capacity. | Material: Pre-galvanised mild steel.
- Designed for use with multiple headers.
- Ensure the supporting I-Joists are connected together in accordance with the manufacturer’s recommended connection methods, i.e. MJC connectors, or filler blocks.
- Position the HITB hanger onto the face of the supporting I-Joists, ensuring the bottom flanges are tight up against the underside of the bottom chord.
- Fill all face round and obround holes with nails. Install nails into the holes within the bottom flanges.
- Flatten the hanger’s open flanges to the top chords of the supporting I-Joists and install a minimum of 4 nails per flange, 2 to the front and 2 to the rear of the joists.
- Bend the bottom chord tabs over the top face of the bottom chord and install nails through the obround holes into the the top face of the bottom chord.
- Sit the carried joist into the HITB hanger and install the nails through the round and obround holes into the joist.
- Web stiffeners required with HITB and HITB-LT.
Reviews
There are no reviews yet.